Training Library
OSHA-aligned VR safety and operations simulations — all included with every headset, for every trainee. Each module runs fully offline on your headsets with built-in performance scoring, certification tracking, and audit-ready documentation.
Sit-Down Simulator
Train sit-down, stand-up, and pallet jack operators in safe-to-fail simulations. Covers pre-operation inspection, load handling, traveling, pedestrian awareness, ramps & grades, and emergency procedures. Optional physical steering wheels, pedals, and standing apparatus. 60+ minutes per module.
Schedule a Demo →P.A.S.S. Technique
Trainees tour a worksite identifying Class A, B, and C fire hazards. After a fire breaks out, they pull the alarm, select the correct extinguisher, and fight the fire using proper P.A.S.S. technique — maintaining safe distance and correct spraying form.
Schedule a Demo →Energy Isolation
Workers practice the complete lockout/tagout sequence for controlling hazardous energy on industrial machinery. Identify energy sources, shut down equipment, apply lockout devices, and verify zero energy state. Mistakes trigger realistic consequences.
Schedule a Demo →Entrant + Attendant
Permit-required confined space entry training. Teams practice atmospheric monitoring, entry permits, rescue procedures, and communication protocols. Both entrant and attendant roles trained in separate scenarios.
Schedule a Demo →Climbing Simulator
Hazard identification at elevation, harness inspection and donning, anchor point selection, and climbing simulator. Workers experience consequences of incorrect harness use in a safe virtual environment.
Schedule a Demo →Extension Ladder Inspection, Set-Up & Climbing
Three lessons on extension ladders. In mixed reality, in your own space, trainees inspect two ladders and tag the damaged one “Do Not Use”, set the base at 4:1, extend the ladder 3 feet above the landing and tie off the top. Then they climb hand over hand with their tools on their belt, keeping three points of contact, and finish with a scored challenge: choose a safe ladder and a safe spot, with a different defect every time.
Schedule a Demo →Frame Scaffold Inspection, Tagging & Work at Height
Three lessons on frame scaffolds. In mixed reality, in your own space, trainees inspect a scaffold, tag it out of service and fix what they find: a base plate on loose bricks, an open brace lock and a missing plank. They check the repairs and put it back in service with a green tag. Then they climb the access ladder, never the cross braces, with their drill on their belt, and work from the deck without leaning over the guardrails. A scored challenge closes it out: inspect and tag two scaffolds, then do the job from the safe one, with a different defect every time.
Schedule a Demo →Adult CPR, AED Use, Choking & Bleeding Control
Four lessons on workplace emergencies. In mixed reality, in your own space, trainees kneel beside a CPR manikin: they check for a response, send a bystander to call 911 and bring the AED, and give 30 compressions with live depth and rate feedback. They open the airway, give two breaths through a pocket mask, and follow a talking AED through a shock. They clear a choking coworker's airway with back blows and abdominal thrusts, roll an unresponsive coworker into the recovery position, and stop severe bleeding with a tourniquet and wound packing. A scored challenge closes it out in a warehouse: a cardiac arrest, a choking coworker or a severe bleed, chosen at random, with no coaching.
Schedule a Demo →Arc Flash Awareness, Lockout & Test, Contact Release
Four lessons in a plant electrical room, built on NFPA 70E. Trainees read a panel's arc flash label line by line, set the barricade at the arc flash boundary, learn who may cross the limited and restricted approach boundaries, and dress from a PPE cart for the label's incident energy before taking a live reading. They put a motor starter in an electrically safe work condition: find its source on the one-line diagram, tell the operator, stop the conveyor, open the disconnect standing to the side, check the blades, lock and tag it, try to start it, and prove it dead with live-dead-live testing. A coworker caught on a live circuit teaches contact release: don't touch him, cut the power, send for help, then start CPR until EMS takes over. A scored challenge closes it out with a random work order and arc flash label, and no coaching.
Schedule a Demo →Hand Hygiene, Donning, Doffing, Isolation Precautions
Four lessons in a hospital isolation unit, built on CDC guidance. Trainees read the isolation sign on a patient's door, clean their hands with alcohol hand rub for the full 20 seconds, and put on a gown, a surgical mask, a face shield and gloves in the right order, tied, fitted and pulled over the gown's cuffs. At the door after patient care they take it all off safely: gloves first, then eye protection, the gown rolled inside out and the mask by its loops, touching only the clean parts, then hand hygiene. They learn what contact, droplet and airborne precautions each require, and put on an N95 respirator with a user seal check. A scored challenge closes it out with a random isolation sign and a task in the room, and no coaching.
Schedule a Demo →Sling Inspection, Rigging, Overhead Crane Lifts
Three lessons with a 5-ton overhead bridge crane, built on OSHA 1910.184 and 1910.179 and ASME B30. Trainees inspect web, wire rope and chain slings and shackles in their own space in mixed reality, keep the good gear and take damaged gear out of service. Then, in a crane bay, they rig and lift a pump skid with a radio remote: the crane's rated load, the load's weight and center of gravity, the sling's tag, the hook over the center of gravity, the master link and hooks in the lifting lugs, a tag line, the horn to clear the area, a slow take-up of the slack, the sling angle, a test lift, travel to the blocking and setting it down. A scored challenge closes it out with a random work order, a damaged sling on the rack, a coworker who walks into the load's path, and no coaching.
Schedule a Demo →Getting Out, Hiding & Barricading, When Police Arrive
Four lessons in an office building, built on CISA's and the FBI's guidance for an active shooter. No attacker, weapon or injury is ever shown: the gunshots are heard, muffled, and every lesson opens with a content notice and a way to stop. Trainees find the two ways out and a room that locks; get out when the danger is on the other side, leaving their things, telling a coworker to come, calling 911 from the assembly point and showing empty hands to the police; and, when there is no way out, lock and block the door, turn off the lights, silence their phone, hide out of sight and text 911, with fighting back only as the last resort. A scored challenge puts the danger somewhere new each time, with no coaching.
Schedule a Demo →Around Tuggers, Inspect & Hitch, Driving the Route
Four lessons in a manufacturing plant with a one-way tugger route, built on OSHA 29 CFR 1910.178 and tow tractor manufacturers' rules. Everyone who works where tuggers run learns to stay on the walkway, wait at the crosswalk for the driver's wave, stay clear of the corner where the carts cut inside the tugger's path, and never step between or ride on carts. Drivers unplug and inspect the tugger, check the dollies, couple the train with its hitch pin and clip, then drive the route: the speed limits, a stop and the horn at the cross aisle, yielding to pedestrians, swinging wide at the corner, clearing a tote from the lane, swapping a dolly at line-side and parking at the charger. A scored challenge brings a random defect and random events on the route, with no coaching.
Schedule a Demo →OSHA Big 4 / Site Safety
Guided and unguided facility walkthroughs to identify, categorize, and correct workplace hazards. Covers the Fatal Four — caught-in-between, electrocution, fall, and striking hazards — plus HAZCOM standard symbols.
Schedule a Demo →Hazardous Materials
Hazardous materials identification, GHS labeling system, Safety Data Sheet interpretation, and emergency spill response. Multi-player scenario available for team-based hazmat response training.
Schedule a Demo →Pallet Jack / Standing / Cage
Specialized forklift operations for battery warehouse environments — pallet jack, standing, and cage variants. Covers unique hazards and operating procedures for each vehicle type.
Schedule a Demo →Emergency Response
Emergency response procedures for downed power line scenarios. Covers safe distances, vehicle escape procedures, shuffle step technique, and public safety protocols for municipal and utility workers.
Schedule a Demo →Musculoskeletal Prevention
Proper lifting techniques, workstation setup, repetitive motion awareness, and musculoskeletal injury prevention. Interactive VR scenarios teach body mechanics for common industrial tasks.
Schedule a Demo →PPE & Machine Guarding
PPE selection for hand protection, pinch-point awareness, machine guarding requirements, and proper glove use for industrial environments.
Schedule a Demo →Walking Surfaces
Hazard identification for walking-working surfaces, housekeeping protocols, and corrective action training in realistic industrial environments.
Schedule a Demo →Passenger Vehicles
Passenger vehicle operation training including defensive driving techniques, hazard recognition, pre-trip inspection procedures, and emergency maneuvers.
Schedule a Demo →Renewable Energy
Safety procedures for solar farm installation and maintenance — fall protection at elevation, arc flash awareness, electrical isolation, and emergency procedures specific to photovoltaic operations.
Schedule a Demo →Agricultural
Grain bin entry hazards, engulfment prevention, lockout procedures, and rescue operations. Simulates progressive dangers and proper rescue team coordination.
Schedule a Demo →Full Library Access
Every trainee gets access to the entire library with their own profile, progress tracking, and certification. No per-topic restrictions. Assign any module to any person, anytime. Every trainee gets their own seat at no extra cost, with unlimited practice.
modules included
with every headset
Custom Development
Your facility. Your procedures. Your equipment. We build fully custom VR training modules from the ground up — typical turnaround in weeks, not months.
Request Custom Module →