Schedule DEMO
Everything you need to unbox, power on, and start VR safety training in minutes. Traditional training teaches information — VR builds habits.
Watch First
Watch this short video before your first session. It covers headset basics, navigation, and what to expect from VR safety training.
3-minute orientation — recommended for all new users
Get Started
No IT department needed. Workers can go from unboxing to training in under 5 minutes.
Turn It On
Locate the power button on the top-right of the headset. Press and hold it for 2–3 seconds until the indicator light turns on. The headset will boot into the Humulo training environment automatically.
Pairing
If the controller isn't connected, press and hold the Home button on the controller until it pairs with the headset. The controller LED will stop blinking once connected.
Adjust Eye Lenses
If the display looks blurry, take the headset off and adjust the interpupillary distance (IPD) — push the lenses closer together or further apart until the image is sharp. You can also use the powered adjustment setting in the headset menu.
VR Tutorial
Select your organization from the list, enter your name, and follow the on-screen instructions for the "VR Tutorial." This short guided walkthrough teaches you how to navigate, interact with objects, and use the controls before starting real training modules.
Good to Know
A common surprise during training — here’s what’s happening and how to switch back.
Pass-Through Mode
If the training environment disappears and you can see the room around you, you’ve activated pass-through — a built-in headset feature that uses the front cameras to show your real surroundings. This is normal and not a problem with your headset or your training.
Pass-through is handy for grabbing a dropped controller, taking a sip of water, or chatting with someone nearby without removing the headset.
To return to VR: double-tap the right side of the headset (the temple area, just above your ear). The training scene will come right back where you left off.
For Training Owners
Training Owners are the primary account holders for your organization. Log in to manage your team, track training progress, and configure headsets at humulo.com/my-account.
Use the same username and password you created when purchasing your Humulo VR Training subscription.
Go to My Account →Share the View
Show what the VR user sees on a TV or projector — perfect for group training sessions, safety meetings, and instructor-led demonstrations.
Single Headset
Plug the Miracast dongle into the HDMI port of a TV or projector (not a PC).
Plug the USB power cord into an open USB port on the TV or projector.
On the headset, open the menu and select "Cast" — choose the Miracast dongle from the list.
Up to 4 Headsets
Build the unit — stick the power strip to the Velcro on the back of the HDMI splitter, then run the USB-C cable from the splitter’s power port to a USB-C port on the power strip.
Connect the Miracast dongles — plug each dongle’s HDMI end into one of the four INPUT ports and its USB-A end into the power strip.
Connect your display — run the HDMI cable from the splitter’s OUTPUT to a TV or monitor, then plug the power strip into the wall.
On each headset, select "Cast" and pick the dongle name shown on the TV. All feeds appear on the shared display.
Photos of every step, the splitter’s controls, and quick fixes.
Forklift Physical Controls
Need Help?
Our support team is available to help with setup, troubleshooting, and training questions.
Explore our full library of OSHA-aligned VR safety training or contact us about custom development for your facility.